The Top 5 Must Have Restoration Equipment for Removing Mold Damage from Wood Furniture

Removing Mold from Wood Furiture

Removing or cleaning mold and mildew from wood is actually much simpler to do than it looks.  You typically only need a handful of equipment that will help you kill the pesky mold.  Not only that, the great thing is you probably already have much of the necessary restoration equipment available on hand!

Mildew is a type of mold that thrives in warm, moist environments. It can grow in nearly any location that has oxygen, moisture, and the slightest amount of organic material such as food or soil. Most mildew can be killed and removed with a few simple steps. If the mold continues to return, it usually means that all of the spores were not removed. Most mildew removers are chlorine based and if they are not removed completely, the mildew will use the residue to grow on when humidity levels rise again. Periodic cleanings may be necessary until the mold is gone for good.

Removing Mildew from Painted Wood

You Will Need:

• Chlorine bleach
• Water
• Buckets
• Sponges
• Rubber gloves

Steps to Remove the Mildew and Mold:

1. Begin by mixing one gallon of water with ¾ cup of bleach in the bucket.
2. Fill a second bucket with plain, clean water.
3. Moisten a sponge with the solution and gently scrub the mold and mildew until it is gone. Avoid letting water set on the wood for too long as it may cause damage. If necessary, repeat several times, drying each time so that the wood does not become saturated and warped.
4. When the stains are removed, rinse with clean water from the second bucket.
5. Ensure that all bleach residue is removed or it can lead to future growth.
6. Allow the wood to dry completely.

Article from http://www.howtocleanstuff.net/outdoors/how-to-remove-mildew-from-wood/

Mold Spores on Wood – Do It Yourself Tips to Help You Remove Those Awful Molds

Removing mold from wood is a problem that many seek to resolve but first you must understand how mold actually comes to form on wood.

Wood is like mold’s little playground.  Wood fibers contain all the necessities that molds need to form and spread.  The protein, sugar, and other biological materials provide the necessary food for mold.  Add in other factors such as warm temperature,  oxygen and moisture and you may find yourself searching for the best mold removal tips to remedy your problem.

How to Remove Mold from Wood

Removing small amounts of mold is pretty simple and you likely have the necessary materials laying around the house.  Bleach is commonly recommended for specifically handling mold issues in wood and as always you should handle it carefully.  The water damaged wood should first be dried to remove moisture before any cleaning takes place.  Once it’s dry, make sure to wear protective gloves and eye wear while scrubbing the wood with diluted bleach.  Or if you prefer, use a commercial cleaner for mold problems and follow the same safety precautions.  Bleach also helps with the discoloration you usually see when mold and wood

One of the biggest obstacles with removing mold spores from wood is preventing the mold from going airborne while cleaning.  This can be prevented my first spraying the mold down before wiping.  Also, utilizing a hepa vacuum cleaner in the surrounding area will also help reduce the amount of spores released in the air.  A HEPA vacuum has high quality filters that remove 99% of allergens, dust, ragweed and other particulates from the air.

If the job is too large, then go ahead and hire a restoration company to handle the problems.  There are sure to be many local companies that provide the necessary services and equipment needed to address the mold problems in your home.  Otherwise it is likely that you will be able to do it yourself with just the tips mentioned above.  Whatever you decide, the most important thing is to take immediate action when mold stars to form.  Letting mold sit and continue to spread is harmful and toxic to yourself and others.

How-to Tips to Removing Mold Spores

Mold Removal Tips

Molds live all around us.  Mold spores float in the air like pollen.  So you breathe them and they may be deposited in your lungs, as well as your nose and throat.  Common sources of airborne molds include bathrooms, damp basements, carpeting, poorly ventilated closets, old upholstered furniture, humidifiers, even decaying leaves, stored fruits and vegetables, old wallpaper and home air ducts.  Some may even be found on leather, cloth, rubber, wood and paper products.  Mold and water damage go hand in hand and is definitely a huge problem for most homeowners.

If you want to control molds around you, change the settings that support their growth.  Here are some mold removal tips to eradicate and prevent molds from growing and spreading.

• Remove mold from wood floors with dry cleaning fluid; if the mold is deeply embedded in the wood, use bleach or disinfectant.  Rewax to restore the shine.  Since mold needs a damp and wet environment, keep it from coming back by making sure that the area is well ventilated.  Severe yellowing and darkening of older wood floors is most likely caused by the buildup of many years of varnish applications and may not be mold problem.  All you have to do is refinish the floor.
• Mold can also grow in home humidifiers unless it is regularly and thoroughly cleaned out.  If you see greenish slimy growth in the float chamber, it is definitely mold.  This greenish growth can cause airborne spores which could circulate around the house by the action of the blower.
• Bathrooms should also be clean at all times or they may be susceptible to mold growth if left dirty for a long time.  If you can’t get around to cleaning the bathroom every day or every other day, sponge down the bathroom areas from cleanest to dirtiest at least once a week and use a liquid disinfectant cleaner.  The ideal order would be mirror, sink, tub, toilet, wall and floor.  Wear rubber gloves, safety goggles and protective garments.
• Prevention is still the best method for eliminating molds.  Exhaust fans can do a good job of removing excess moisture in the bathroom.  If it’s dry outside, leave the window and door open to allow proper ventilation.
• Installing an UV light bulb inside closet can keep molds at bay.
• Regularly wash, air and sun mattresses, pillows and rugs to kill mold and prevent them from growing or multiplying.

Molds can cause all sorts of respiratory problems including severe allergies, headaches, sore throat, runny nose and asthma.  If your house has been contaminated with mold and water damage, these mold removal tips may help.  But if the problem has gotten so big for you to handle on your own, it may be wise to hire a knowledgeable mold remediation person or company to take a look at your home and see if he can recommend structural changes that can prevent moisture or suggest ways to reduce mold growth.

Black Mold Removal: Top 10 Safety Guidelines

How Do I Safely Get Rid of Black Mold?

Black mold from water damage is a toxic substance so  every effort should be taken to ensure you and the rest of your home are kept safe during its removal.   Here are my top 10 tips for staying safe during your toxic black mold removal.

Tip 1

Always wear a dust mask! This is the most essential piece of equipment available to you and one that should always be worn. Black mold primarily causes respiratory difficulties. This greatly aid in stopping any inhalation of mold spores and keep you safe throughout the removal.

Tip 2

Full body protective clothing should be worn. No exposed skin should be left as black mold can cause skin irritation. When the mold is airborne when removal begins it can easily land on your skin. Ideally the clothing needs to be removable in the contaminated room after clean up. Sadly you cant remove your skin so spreading it to the rest of the house if protective clothing isn’t warn is a very real possibility.

Tip 3

Goggles and earplugs are a piece of protective gear many people over look. Keep the most dust out of your eyes with safety goggles and prevent any mold entering the body via the ear (which provides good growing conditions) with some simple earplugs.

Tip 4

Evacuate family and animals out of the home before your begin clean up. This prevents any exposure to unprotected relatives.

Tip 5

Take regular breaks during a big black mold clean up. The build up of dust in the air coupled with unavoidable contact can cause dizziness, sweats, coughing fits and headaches. Get some fresh air during these breaks.

Tip 6

Keep all the mold you remove from the area in well sealed bags to ensure you don’t contaminate other rooms whilst dragging it thought the house. If possible create a safe zone where you can drop the full bags out a window to a collection point outside.

Tip 7

Do not take any items such as protective clothing from the area without cleaning them first. This will ensure you don’t accidentally contaminate another area.

Tip 8

Use air extractors and purifier’s afterword to ensure the majority of airborne mold is removed also.

Tip 9

Keep the area sealed off and separate using plastic sheeting and tape to avoid cross contamination.

Tip 10

Most importantly dry out the area well after clean up is complete. This will stop any mold secretly gaining a foothold and starting the cycle once more.

Black Mold Removal Info is supplied by John Giveks to ensure you remain safe during your Black mold Clean Up.

Article Source: http://EzineArticles.com/?expert=John_Giveks